Valiant represents the latest evolution in our beam lines range. This product line is a new three-spindle system for the processing of the complete range of rolled structural steel shape. These new models are the result of the constant commitment by our Engineering Team in addressing the requirements of the world’s structural steel fabricators. In addition to the many industry leading innovative designs and featurs of the other structural steel drilling lines in our range, the Valiant incorporates several additional unique features and benefits, as described here below.

processos

Perfuração

Rosqueamento

Fresagem

Escareamento

Traçagem

Marcação

SERRAGEM por fita em combinação com a serra de fita

CÓPIA em combinação com robô

recursos

NEW DOUBLE INDEPENDENT VICES

New independent hydraulic double vice assembly and dual alignment system to improve material clamping. The vice

assembly is made of fix jaw (used for reference), and of one CNC controlled mobile jaw.

[+]

NEW DOUBLE INDEPENDENT VICES

New independent hydraulic double vice assembly and dual alignment system to improve material clamping. The vice assembly is made of fix jaw (used for reference), and of one CNC controlled mobile jaw.

NEW SPINDLE DESIGN

New Direct Drive spindles with reduced shape size and longer nose for higher stiffness, that delivers 100% of the

motor's power to the tool for enhanced drilling performances.

[+]

NEW SPINDLE DESIGN

New Direct Drive spindles with reduced shape size and longer nose for higher stiffness, that delivers 100% of the motor's power to the tool for enhanced drilling performances.

EXTENDED AUXILIARY SUB AXES

The auxiliary axis available on each spindle generates an extra stroke, extended to 300 mm, to carry out countless

operations by keeping the material clamped in position. This translates into greater flexibility and unequalled productivity.

[+]

EXTENDED AUXILIARY SUB AXES

The auxiliary axis available on each spindle generates an extra stroke, extended to 300 mm, to carry out countless operations by keeping the material clamped in position. This translates into greater flexibility and unequalled productivity.

NEW CARRIAGE AND PINCHER

New single or double pincher arm, with possibility of an auxiliary axis on both arms. The new structure and design

has been studied for both the arm and the pincher, which can count on a larger opening and new sensor system.

[+]

NEW CARRIAGE AND PINCHER

New single or double pincher arm, with possibility of an auxiliary axis on both arms. The new structure and design has been studied for both the arm and the pincher, which can count on a larger opening and new sensor system.

14 POSITIONS AUTOMATIC TOOL CHANGER

All three drilling heads can be equipped with a brand new tool-change system with 14 positions, which can therefore

accomodate in total up to 42 different tools.

[+]

14 POSITIONS AUTOMATIC TOOL CHANGER

All three drilling heads can be equipped with a brand new tool-change system with 14 positions, which can therefore accomodate in total up to 42 different tools.

ADVANCED MILLING

Thanks to the auxiliary axes feature, advanced milling operations such as helical milling, pocketing, weld-prep,

slotting and more are available on this model.

[+]

ADVANCED MILLING

Thanks to the auxiliary axes feature, advanced milling operations such as helical milling, pocketing, weld-prep, slotting and more are available on this model.

MAGNETIC DEVICE

When combined with band saw, a special device with magnet allows to unload short pieces towards the outfeed rollerway

or onto the unloading table for short pieces.

[+]

MAGNETIC DEVICE

When combined with band saw, a special device with magnet allows to unload short pieces towards the outfeed rollerway or onto the unloading table for short pieces.

SINGLE CNC CONTROL UNIT

When combined with band saw or with thermal coping robot, there is no need to add a further CNC unit as the entire

system is controlled by a single CNC.

[+]

SINGLE CNC CONTROL UNIT

When combined with band saw or with thermal coping robot, there is no need to add a further CNC unit as the entire system is controlled by a single CNC.

SAFETY

All our systems are supplied in accordance with the highest safety standards and regulations.

SAFETY

All our systems are supplied in accordance with the highest safety standards and regulations.

galeria

vantagens

Valiant represents a new age in our drilling range thanks to all the technological innovations which have been implemented on this model
The extended 300 mm auxiliary axis available on all three spindles is one of the most important innovation, allowing a wider independent control of each spindle
The new sub-axis spindle positioning enables simultaneous drilling on all three surfaces even when the holes are not aligned. The underside scribing device, also with sub-axis positioning, permits up to four-side simultaneous scribing operations

especificações técnicas

AUTOMATIC CNC MULTISPINDLE DRLLING LINE – VALIANT	453V	603V	1203V	2003/6V	2003/8V
Tamanho mínimo do perfil [mm]	60x10	80x10	80x10	80x10	200x75
Tamanho máximo do perfil [mm]	450x450	610x305	1220x610	2030x610	2030x810
Mandril de perfuração	3	3	3	3	3
Ferramentas de perfuração por cabeçote [nº]	6/14	6/14	6/14	6/14	6/14
Diâmetro de perfuração [mm máx.]	40	40	40	40	40
Potência do mandril [kW]	31	31	31	31	31
RPM máxima do mandril	5000	5000	5000	5000	5000
Curso auxiliar [mm]	300	300	300	300	300
Peso da máquina [kg]	10000	11500	13000	14500	15000

AUTOMATIC CNC MULTISPINDLE DRLLING LINE – VALIANT	453V
Tamanho mínimo do perfil [mm]	60x10
Tamanho máximo do perfil [mm]	450x450
Mandril de perfuração	3
Ferramentas de perfuração por cabeçote [nº]	6/14
Diâmetro de perfuração [mm máx.]	40
Potência do mandril [kW]	31
RPM máxima do mandril	5000
Curso auxiliar [mm]	300
Peso da máquina [kg]	10000

AUTOMATIC CNC MULTISPINDLE DRLLING LINE – VALIANT	603V
Tamanho mínimo do perfil [mm]	80x10
Tamanho máximo do perfil [mm]	610x305
Mandril de perfuração	3
Ferramentas de perfuração por cabeçote [nº]	6/14
Diâmetro de perfuração [mm máx.]	40
Potência do mandril [kW]	31
RPM máxima do mandril	5000
Curso auxiliar [mm]	300
Peso da máquina [kg]	11500

AUTOMATIC CNC MULTISPINDLE DRLLING LINE – VALIANT	1203V
Tamanho mínimo do perfil [mm]	80x10
Tamanho máximo do perfil [mm]	1220x610
Mandril de perfuração	3
Ferramentas de perfuração por cabeçote [nº]	6/14
Diâmetro de perfuração [mm máx.]	40
Potência do mandril [kW]	31
RPM máxima do mandril	5000
Curso auxiliar [mm]	300
Peso da máquina [kg]	13000

AUTOMATIC CNC MULTISPINDLE DRLLING LINE – VALIANT	2003/6V
Tamanho mínimo do perfil [mm]	80x10
Tamanho máximo do perfil [mm]	2030x610
Mandril de perfuração	3
Ferramentas de perfuração por cabeçote [nº]	6/14
Diâmetro de perfuração [mm máx.]	40
Potência do mandril [kW]	31
RPM máxima do mandril	5000
Curso auxiliar [mm]	300
Peso da máquina [kg]	14500

AUTOMATIC CNC MULTISPINDLE DRLLING LINE – VALIANT	2003/8V
Tamanho mínimo do perfil [mm]	200x75
Tamanho máximo do perfil [mm]	2030x810
Mandril de perfuração	3
Ferramentas de perfuração por cabeçote [nº]	6/14
Diâmetro de perfuração [mm máx.]	40
Potência do mandril [kW]	31
RPM máxima do mandril	5000
Curso auxiliar [mm]	300
Peso da máquina [kg]	15000