Steel construction machinery | Angles and flats
XP
intro
processes
features
gallery
advantages
tech specs

XP range of angle processing lines represents a real breakthrough in the transmission towers field: these brand new lines is our response to an always more demanding world in which fabricators have to face with very hard schedules with high productivity and high accuracy requirements.

processes

processes
Punching
Shearing
Marking
features
features

PUNCHING UNITS


Super fast punching operations on one, two or three diameters per flange, ensured by the new hydraulic power pack.
Each punching unit has its own cylinder and independent positioning system for faster pre-positioning.
[+]

PUNCHING UNITS


Super fast punching operations on one, two or three diameters per flange, ensured by the new hydraulic power pack. Each punching unit has its own cylinder and independent positioning system for faster pre-positioning.

SHEARING UNIT


Faster single cut shearing unit, whose force and speed are automatically adjusted by the CNC according to the
material size being processed.
[+]

SHEARING UNIT


Faster single cut shearing unit, whose force and speed are automatically adjusted by the CNC according to the material size being processed.

MARKING UNIT


Marking of pieces is possible thanks to the rotating disc marking unit or to the classic drawer-type marking device.

MARKING UNIT


Marking of pieces is possible thanks to the rotating disc marking unit or to the classic drawer-type marking device.

NEW GENERATION HYDRAULIC POWER PACK


Hydraulic power pack of new concept, allowing the automatic CNC controlled adjustment of the working units pressure
to optimize each operation.
[+]

NEW GENERATION HYDRAULIC POWER PACK


Hydraulic power pack of new concept, allowing the automatic CNC controlled adjustment of the working units pressure to optimize each operation.

FAST ANGLE FEEDING SYSTEM


Improved, high speed and precise carriage with pincher system to feed bars at 120 mt/min.

FAST ANGLE FEEDING SYSTEM


Improved, high speed and precise carriage with pincher system to feed bars at 120 mt/min.

FASTER MATERIAL POSITIONING


The XP lines are equipped with a brand new hold-down system which constantly keep contact with the material even
during positioning.
[+]

FASTER MATERIAL POSITIONING


The XP lines are equipped with a brand new hold-down system which constantly keep contact with the material even during positioning.

BAR LENGTH DETECTION


Thanks to a laser device positioned on the infeed rollerway it is possible to exactly detect the bar length and
position.
[+]

BAR LENGTH DETECTION


Thanks to a laser device positioned on the infeed rollerway it is possible to exactly detect the bar length and position.

ROTATING LOADING SYSTEM


Special system with V-shaped supports for the automatic loading of the angles onto the infeed idle rolls conveyor.

ROTATING LOADING SYSTEM


Special system with V-shaped supports for the automatic loading of the angles onto the infeed idle rolls conveyor.

CROSS TRANSFER SYSTEM


All our lines can be configured with infeed and outfeed cross transfer tables to allow automatic loading/unloading of
bars and processed pieces.
[+]

CROSS TRANSFER SYSTEM


All our lines can be configured with infeed and outfeed cross transfer tables to allow automatic loading/unloading of bars and processed pieces.
gallery
gallery
advantages
advantages
  • Highly precise and accurate processing specifically required in the transmission towers field.
  • Extreme robustness to face challenging work schedule in extreme weather conditions.
  • High performance hydraulic power units to better compete in an always more productive environment.
  • Remote diagnosis is possible through a network connection that allows our service team to perform routine checks.
tech specs
tech specs
CNC PUNCHING AND SHEARING LINE FOR ANGLES - XP XP10T2XP10T4XP12T4XP12T6XP16T4XP16T6

Min. angle size (410 N/mm²) [mm]

30x30x330x30x330x30x330x30x340x40x440x40x4

Max. angle size (410 N/mm²) [mm]

100x100x10100x100x10120x120x13120x120x13160x160x19160x160x19

Diameter per flange [no.]

122323

Punching force [kN]

500500650650800800

Max. punching diameter [mm]

323232323232

Shearing force [kN]

100010001800180022002200


CNC PUNCHING AND SHEARING LINE FOR ANGLES - XPXP10T2

Min. angle size (410 N/mm²) [mm]

30x30x3

Max. angle size (410 N/mm²) [mm]

100x100x10

Diameter per flange [no.]

1

Punching force [kN]

500

Max. punching diameter [mm]

32

Shearing force [kN]

1000
CNC PUNCHING AND SHEARING LINE FOR ANGLES - XPXP10T4

Min. angle size (410 N/mm²) [mm]

30x30x3

Max. angle size (410 N/mm²) [mm]

100x100x10

Diameter per flange [no.]

2

Punching force [kN]

500

Max. punching diameter [mm]

32

Shearing force [kN]

1000
CNC PUNCHING AND SHEARING LINE FOR ANGLES - XPXP12T4

Min. angle size (410 N/mm²) [mm]

30x30x3

Max. angle size (410 N/mm²) [mm]

120x120x13

Diameter per flange [no.]

2

Punching force [kN]

650

Max. punching diameter [mm]

32

Shearing force [kN]

1800
CNC PUNCHING AND SHEARING LINE FOR ANGLES - XPXP12T6

Min. angle size (410 N/mm²) [mm]

30x30x3

Max. angle size (410 N/mm²) [mm]

120x120x13

Diameter per flange [no.]

3

Punching force [kN]

650

Max. punching diameter [mm]

32

Shearing force [kN]

1800
CNC PUNCHING AND SHEARING LINE FOR ANGLES - XPXP16T4

Min. angle size (410 N/mm²) [mm]

40x40x4

Max. angle size (410 N/mm²) [mm]

160x160x19

Diameter per flange [no.]

2

Punching force [kN]

800

Max. punching diameter [mm]

32

Shearing force [kN]

2200
CNC PUNCHING AND SHEARING LINE FOR ANGLES - XPXP16T6

Min. angle size (410 N/mm²) [mm]

40x40x4

Max. angle size (410 N/mm²) [mm]

160x160x19

Diameter per flange [no.]

3

Punching force [kN]

800

Max. punching diameter [mm]

32

Shearing force [kN]

2200