Steel construction machinery | Angles and flats
SP
intro
processes
features
gallery
advantages
tech specs

Our SP lines are exceptional CNC punching and shearing work cell  where an angle enters as a stock length and exits as a completed part, after a combination of programmed processes such as punching, marking, shearing. These modular lines can have different configurations, both in terms of size and capacity, to address the various fabrication needs in one single pass.

processes

processes
Punching
Shearing
Marking
features
features

PUNCHING UNITS


The SP angle lines are equipped with one, two or three punching units per flange. Each of them is fitted with easy
removable punch-holders for quick punch and die change.
[+]

PUNCHING UNITS


The SP angle lines are equipped with one, two or three punching units per flange. Each of them is fitted with easy removable punch-holders for quick punch and die change.

SHEARING UNIT


Single cut shear with special hold-down systems for utmost shearing precision. All shearing blades are manufactured
internally to guarantee best quality and longer tool life.
[+]

SHEARING UNIT


Single cut shear with special hold-down systems for utmost shearing precision. All shearing blades are manufactured internally to guarantee best quality and longer tool life.

MARKING UNIT


Marking of pieces is possible thanks to a drawer-type marking device.

MARKING UNIT


Marking of pieces is possible thanks to a drawer-type marking device.

HIGH PERFORMANCE HYDRAULIC POWER PACK


Thanks to outstanding improvements to the hydraulic circuits, a considerable reduction in cycle times is obtained ,
with over 20% higher performance.
[+]

HIGH PERFORMANCE HYDRAULIC POWER PACK


Thanks to outstanding improvements to the hydraulic circuits, a considerable reduction in cycle times is obtained , with over 20% higher performance.

FAST ANGLE FEEDING SYSTEM


High speed carriage with pincher system for fast and accurate angle feeding through the working units.

FAST ANGLE FEEDING SYSTEM


High speed carriage with pincher system for fast and accurate angle feeding through the working units.

BAR LENGTH DETECTION


Thanks to a laser device positioned on the infeed rollerway it is possible to exactly detect the bar length and
position.
[+]

BAR LENGTH DETECTION


Thanks to a laser device positioned on the infeed rollerway it is possible to exactly detect the bar length and position.

ROTATING LOADING SYSTEM


Special system with V-shaped supports for the automatic loading of the angles onto the infeed idle rolls conveyor.

ROTATING LOADING SYSTEM


Special system with V-shaped supports for the automatic loading of the angles onto the infeed idle rolls conveyor.

CROSS TRANSFER SYSTEM


All our lines can be configured with infeed and outfeed cross transfer tables to allow automatic loading/unloading of
bars and processed pieces.
[+]

CROSS TRANSFER SYSTEM


All our lines can be configured with infeed and outfeed cross transfer tables to allow automatic loading/unloading of bars and processed pieces.
advantages
advantages
  • Highly precise and accurate processing specifically required in the transmission towers field.
  • Extreme robustness to face challenging work schedule in extreme weather conditions.
  • High performance hydraulic power units to better compete in an always more productive environment.
  • Remote diagnosis is possible through a network connection that allows our service team to perform routine checks.
tech specs
tech specs
CNC PUNCHING AND SHEARING LINE FOR ANGLES - SP SP10T2SP10T4SP12T4SP16T6SP20T6SP25T6

Min. angle size (410 N/mm²) [mm]

35x35x335x35x335x35x340x40x440x40x440x40x4

Max. angle size (410 N/mm²) [mm]

100x100x10100x100x10120x120x13160x160x19200x200x25250x250x25

Diameter per flange [no.]

122333

Punching force [kN]

50050065080010001000

Max. punching diameter [mm]

323232323232

Shearing force [kN]

100010001800220045004800


CNC PUNCHING AND SHEARING LINE FOR ANGLES - SPSP10T2

Min. angle size (410 N/mm²) [mm]

35x35x3

Max. angle size (410 N/mm²) [mm]

100x100x10

Diameter per flange [no.]

1

Punching force [kN]

500

Max. punching diameter [mm]

32

Shearing force [kN]

1000
CNC PUNCHING AND SHEARING LINE FOR ANGLES - SPSP10T4

Min. angle size (410 N/mm²) [mm]

35x35x3

Max. angle size (410 N/mm²) [mm]

100x100x10

Diameter per flange [no.]

2

Punching force [kN]

500

Max. punching diameter [mm]

32

Shearing force [kN]

1000
CNC PUNCHING AND SHEARING LINE FOR ANGLES - SPSP12T4

Min. angle size (410 N/mm²) [mm]

35x35x3

Max. angle size (410 N/mm²) [mm]

120x120x13

Diameter per flange [no.]

2

Punching force [kN]

650

Max. punching diameter [mm]

32

Shearing force [kN]

1800
CNC PUNCHING AND SHEARING LINE FOR ANGLES - SPSP16T6

Min. angle size (410 N/mm²) [mm]

40x40x4

Max. angle size (410 N/mm²) [mm]

160x160x19

Diameter per flange [no.]

3

Punching force [kN]

800

Max. punching diameter [mm]

32

Shearing force [kN]

2200
CNC PUNCHING AND SHEARING LINE FOR ANGLES - SPSP20T6

Min. angle size (410 N/mm²) [mm]

40x40x4

Max. angle size (410 N/mm²) [mm]

200x200x25

Diameter per flange [no.]

3

Punching force [kN]

1000

Max. punching diameter [mm]

32

Shearing force [kN]

4500
CNC PUNCHING AND SHEARING LINE FOR ANGLES - SPSP25T6

Min. angle size (410 N/mm²) [mm]

40x40x4

Max. angle size (410 N/mm²) [mm]

250x250x25

Diameter per flange [no.]

3

Punching force [kN]

1000

Max. punching diameter [mm]

32

Shearing force [kN]

4800