Angle Drill Line
The Ficep CNC angle line solution gives you the opportunity to not only punch angles but also drill them! Especially in the transmission tower world the drilling feature is requested from 12 mm and above. Railway bridges require bracings that are all drilled and not punched. For this reason, the Ficep angle line range typically offers a dedicated drilling solution to deliver outstanding drilling performances. The use of carbide drilling and the available automatic tool changer makes this machine set up free reaching very high levels of productivity and versatility at the same time.
Optionally, a new developed carbide disc sawing unit brings cutting speeds to another unprecedented level.
The following features are also available:
- Sawing (band saw and carbide disc saw)
- Different automatic handling devices for loading and unloading
The new HP High Performance series offers 20% more performance than previous models due to its new spindle solution and tool changer.
Pylons builders have to face exasperating work schedules, often in extreme environment conditions. These needs are answered by the CNC lines in the new HP range which are outstanding for their:
- extreme robustness
- resistance to fatigue and extreme climates
- dedicated intuitive hardware and software.
The modular HP line can be combined in different ways, both in terms of size and the capacity to carry out various operations in a single pass. The customer can easily configure a line which can be made to measure to suit company needs. The HP lines are true and proper work cells where an angle enters as raw material and exits in an infinite combination of drilled, marked and cut to length segments.
FICEP takes care of the ergonomic and safety details during the design activities. The machines comply with the CE regulations and each layout can be designed suggesting to the customer the most functional and safe criteria.
Safety does not get lost in production.
On the contrary, well thought of and engineered safety solutions have pushed FICEP engineers to think about functionalities that involve much reduced interventions, if not none, from the operator over the machine cycle. The consequences to this approach are reflected in a much reduced variance from cycle to cycle of the machine performance giving higher throughputs on the short and on the long run.
Model HP 35 T Maximum angle
14 x 14 x 1-9/16
Maximum Diameters Per Leg 6 Marking optional Notching optional Measuring system Rack and Pinion Shear optional Carbide saw optional
Single cut angle shear Double cut angle shear Band saw Carbide saw Short piece conveyor Automatic unloading conveyor Automatic outfeed roller conveyor Idle rolls unloading conveyor Loading table with catches